• IQ4/IO/16DI
    • IQ4/IO/4DO
    • IQ4/IO/4UIO
    • IQ4/IO/8AO
    • IQ4/IO/8DI
    • IQ4/IO/8DO
    • IQ4/IO/8UI
    • IQ4/IO/8UIO
    • IQ4/IC/ADPT/10
    • IQ4/IC/LINK/5
    • IQ4/IC/TERM/5
    IQ4E Trend LAN Controller
    iq4-uk0y
    The IQ4E controller has 10 universal inputs and 6 analogue voltage outputs and is expandable up to 192 points (depending on the controller variant) by adding I/O modules. This flexibility makes it suitable for a broad range of applications. The IQ4E controller uses Ethernet and TCP/IP networking technologies with embedded XML and is fully compatible with other Trend IQ controllers. The IQ4E supports BACnet over IP as standard. Trend communications over a current loop LAN is available as an option. A local PC or display (e.g. IQView4) can be connected to the RS232 port. A Wallbus port is also provided for use with room displays.
    NetworkTrend LAN
    Additional descriptionThe following features are available:
    16 onboard I/O channels - 10 inputs and 6 outputs
    I/O bus supports up to a total of 192 I/O channels (depending on the controller variant) using additional I/O modules
    I/O bus length up to 300 m (328 yards)
    Ethernet 10/100 Mbps main network with TCP/IP protocol
    Embedded XML Web Services as standard
    BACnet over IP
    Small footprint with DIN rail mounting for DIN 19 size 2 standard enclosure
    DisclaimerThis selection tool is designed to be used as a guide, please ratify any selections made prior to ordering your IQ4 equipment.
    This tool does not calculate any additional power supplies required for the i/o modules. Please refer to the requirements for powering the modules as stipulated in the IQ4 training course.
    The IQ4 Points Calculator aims to calculate the controllers and modules required in the most cost effective manner. In cases this may mean that modules are fitted to the controller where some points on those modules cannot be connected within the controller firmware. In such cases we suggest the connectors are removed or other indication is made.
    BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse, approve or test products for compliance with ASHRAE standards. Compliance of listed products to the requirements of ASHRAE Standard 135 is the responsibility of BACnet International (BI). BTL is a registered trademark of BI.
    *IQ4/IO/8DI, IQ4/IO/8AI, IQ4/IO/8AO, IQ4/IO/4UIO are not available until December 2015 please use the IQ4/IO/8UIO modules or equivalent XCITE/IO modules instead.
    IQ4E
    iq4-uk0y
    The IQ4E controller has 10 universal inputs and 6 analogue voltage outputs and is expandable up to 192 points (depending on the controller variant) by adding I/O modules. This flexibility makes it suitable for a broad range of applications. The IQ4E controller uses Ethernet and TCP/IP networking technologies with embedded XML and is fully compatible with other Trend IQ controllers. The IQ4E supports BACnet over IP as standard. Trend communications over a current loop LAN is available as an option. A local PC or display (e.g. IQView4) can be connected to the RS232 port. A Wallbus port is also provided for use with room displays.
    NetworkTCP/IP
    Additional descriptionThe following features are available:
    16 onboard I/O channels - 10 inputs and 6 outputs
    I/O bus supports up to a total of 192 I/O channels (depending on the controller variant) using additional I/O modules
    I/O bus length up to 300 m (328 yards)
    Ethernet 10/100 Mbps main network with TCP/IP protocol
    Embedded XML Web Services as standard
    BACnet over IP
    Small footprint with DIN rail mounting for DIN 19 size 2 standard enclosure
    DisclaimerThis selection tool is designed to be used as a guide, please ratify any selections made prior to ordering your IQ4 equipment.
    This tool does not calculate any additional power supplies required for the i/o modules. Please refer to the requirements for powering the modules as stipulated in the IQ4 training course.
    The IQ4 Points Calculator aims to calculate the controllers and modules required in the most cost effective manner. In cases this may mean that modules are fitted to the controller where some points on those modules cannot be connected within the controller firmware. In such cases we suggest the connectors are removed or other indication is made.
    BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse, approve or test products for compliance with ASHRAE standards. Compliance of listed products to the requirements of ASHRAE Standard 135 is the responsibility of BACnet International (BI). BTL is a registered trademark of BI.
    *IQ4/IO/8DI, IQ4/IO/8AI, IQ4/IO/8AO, IQ4/IO/4UIO are not available until December 2015 please use the IQ4/IO/8UIO modules or equivalent XCITE/IO modules instead.
     АВИК Инжиниринг - авторизованный Системный Интегратор
      
    • IQ4E/128-160/UP
    • IQ4E/128/BAC/230
    • IQ4E/16-32/UP
    • IQ4E/16/BAC/230
    • IQ4E/160-192/UP
    • IQ4E/160/BAC/230
    • IQ4E/192/BAC/230
    • IQ4E/32-64/UP
    • IQ4E/32/BAC/230
    • IQ4E/64-96/UP
    • IQ4E/64/BAC/230
    • IQ4E/96-128/UP
    • IQ4E/96/BAC/230
     АВИК Инжиниринг - авторизованный Системный Интегратор

    iq4nc-uk0yIQ4NC

    Ethernetyes
    Trend LANyes
    BACnet IPyes
    Power230V
    The IQ4NC enables Trend networks on different media (either Ethernet, Trend current loop, or MS/TP) to be joined together in various configurations. It provides 4 virtual CNCs which allow supervisors or tools on the Ethernet network to connect to the Trend system.
    Additional descriptionFeatures include:
    Ethernet 10/100 Mbps main network with TCP/IP protocol
    Provide Trend system interface with MS/TP trunk
    Extend Trend network from Ethernet to Trend current loop
    INC alarm forwarding (e.g. enabling IQeco alarms to be forwarded to an IP address)
    Compatible with existing IQ system protocol
    BACnet over MS/TP
    BACnet over IP
    230 Vac or 24 Vac input power supply options
    Small footprint with DIN rail mounting
    RS232 and USB local supervisor ports
    DIN43880 standard enclosure
    DisclaimerBACnet is a registered trademark of ASHRAE. ASHRAE does not endorse, approve or test products for compliance with ASHRAE standards.